A 3/4-hp gear motor provides smooth operation. The forming pressure is controlled by a crank on the top of the frame on the standard unit; an optional hydraulic powered forming pressure unit is available. Rolls are ordered separately for this unit.
Crimping, single beading, ogee beading, elbow edging, flattening, wiring, burring and turning rolls are available.
Please contact TENNSMITH for special application forming.
MODEL SPECIFICATIONS
| Capacity, Mild Steel | 16 Gauge 1.6 mm |
| Capacity, Stainless Steel | 20 Gauge 1.0 mm |
| Throat | 10 in. 254 mm |
| Distance, Shaft Center to Center | 2-1/2 in. 63.5 mm |
| Gear Ratio | 3:1 |
| Working Speed Variable | 3 to 45 rpm |
| Motor | 3/4 hp |
| Shipping Weight | 350 lbs. 159 kg |
roll chart here
